Monday, August 12, 2013

Monday Made It - No Name Board

I wish I had blogged about this last year after I made my no name board...but I needed to make a new one since the old one didn't totally go with my classroom decor. And, we ALL know how important it is to have things coordinate!

I found this pin last summer and thought it was a genius idea. How many times do kids leave your room and there are either papers on the floor that should be in binders OR a test was turned in without a name!? Too many to count I bet! This puts the accountability on the student. I don't grade something unless it has a name, so, if a student wants a grade and didn't get his/her paper back, they check the no name board.

Here is how I made mine:


Start with a wooden plaque (or you could use a piece of foam board that you have laying around) and some acrylic paint. I knew I wanted to paint mine a teal-ish color, but couldn't find the right color. I mixed mine to get the perfect combination. Paint the top and sides completely and let dry. I did 2 1/2 coats or so. You don't want any wood showing through.

While the paint was drying, I made my letters using my cricut and some adhesive backed vinyl. Don't fret if you don't have a way to do this. You can use any sticker letter that is available at Hobby Lobby, Michaels, JoAnn's or any craft store. You could also use cut paper, etc. So many possibilities.

Mark the center of your plaque so that your letters end up being centered. Ideally this is what should happen. Pay no attention to the fact that mine are completely of center because I measured incorrectly. It's going to be fine. In case you are wondering, I used washi tape to mark the center so that it was easily removable and wouldn't leave residue. 

Ok, they aren't SO badly off-center, right? 

Once, they are where you want them to be, apply a layer of mod podge on top. Let it dry completely!

Remember these from the other day? I made 7 of them by taking regular clothespins from Walmart and covering with washi tape. They look designer!

When the mod podge is dry, glue the clothespins to the wood by using either hot glue or wood glue. I used hot glue because I didn't want to wait for it to totally dry... and I kind of wished I had. 

I'll be sure to post a picture of it in my classroom when I finish setting it up!

Can't wait to see what everyone else who linked up with Tara at 4th grade frolics made!



7 comments:

  1. I keep seeing these pop up all over... think I might have to make one for myself. Yours came out great!

    Liz
    Floating Through Fifth

    ReplyDelete
  2. Your No Name sign turned out really cute! I really should try this instead of screeching out, "SOMEONE FORGOT THEIR NAME!"...lol!
    Alison
    Rockin' and Lovin' Learnin'

    ReplyDelete
  3. I love this, Danielle. And you may have motivated me to try to make some of those cute clothespins!
    SO glad to have found your blog and to be a new follower!

    Kim
    Finding JOY in 6th Grade

    ReplyDelete
  4. I am loving your blog. :)

    I nominated your for a Liebster Award. Check out For the Love of Fourth Grade to see what it's about!

    Kristen

    ReplyDelete
  5. This comment has been removed by the author.

    ReplyDelete
  6. This comment has been removed by the author.

    ReplyDelete